What Dryer Alerts Signal & When to Contact Dryer Vent Wizard

Don't Ignore the Codes: Here's What They're Telling You

Your dryer display is your partner in ensuring a smooth and safe laundry experience.

When it shows an error code, it is alerting you to a problem in the vent system or internal components. It's understandable that not everyone interprets the codes the first time they see them, but having the right information guarantees appropriate action.

While some issues may be cleared with steps from the owner’s manual, if the error continues, Redlands residents should contact Dryer Vent Wizard of Redlands and N San Bernardino for service and further assistance.

Dryer Error Codes by Brand to Remember

Not all brands share the same codes to point to dryer and dryer vent complications. Some brands prefer simple messages, while others use letter-and-number combinations that need decoding. Either way, these alerts often point to clogged vents, overheating risks, or reduced performance. Below is a reference of common code alerts by brand so Redlands homeowners can determine when dryer vent service or professional repair is needed.

Quick Reference Table

LG Dryer Error Codes

• d75 – 75% airflow restriction (early warning)
• d80 – 80% restriction
• d90 – 90% restriction
• d95 – 95% restriction
• FO – Lint filter not inserted
• tE1 / tE2 / tE3 – Thermistor faults
• HS – Humidity sensor fault

If your LG dryer display shows an error code like d80, d90, or d95, stop using the dryer immediately because these errors mean the vent is severely restricted, often clogged with lint, and you should call Dryer Vent Wizard of Redlands and N San Bernardino for professional service and repair.

Samsung Dryer Error Codes (Airflow & Overheating)

Samsung dryer displays often show error codes made up of letters and numbers, similar to LG models, and these codes warn when the vent is clogged or when airflow is restricted.

Vent Blockage Test Codes

• Clg / Cg – Vent clogged
• C80 / C8 / C8o – ~80% blocked
• C90 / C9 / C9o – ~90% blocked

Overheating

• HC / hE / HC4 / 1 HC – Overheating from restricted vent

Temperature Sensor (Airflow-Related)

• tS / t5 / tC / tO / t0 / tE3 / tC5 / tCS / 1tC / 1tC5 / 1tCS – Sensor/control faults from poor airflow

Stop using the dryer immediately if your Samsung display shows an error code for blockage or overheating. Redlands residents should request service from Dryer Vent Wizard of Redlands and N San Bernardino to keep the dryer operating safely.

Whirlpool / Maytag Dryer Error Codes

• AF – Restricted airflow
• F4 E3 – AF equivalent
• F31 – Moisture sensor issue
• F2E1 – Stuck button

Kenmore Dryer Error Codes

• AF – Restricted airflow
• F30 – Lint/fabric softener residue restricting airflow

GE / Electrolux / Frigidaire Dryer Error Codes

• E22 / E64 – Vent or heater fault
• Clean Filter – Reminder (often ignored)
• EF1 (Electrolux) – Ventilation blockage
• E4 – Humidity sensor error
• E8C (Frigidaire) – High limit thermostat tripped
• E A5 – Service needed (control/sensor)
• Mute – Alerts silenced (can hide errors)

Bosch Dryer Error Codes

• E01 / E02 – Fluff filter or vent blockage

Amana Dryer Error Codes

• AF or “Check Vent” – Low airflow from lint or hose issues

Speed Queen Dryer Error Codes

• AF / EAF2 – Airflow problems from clogged vents or lint trap

The Importance of Airflow in Redlands Dryer Systems

Good airflow matters because when the vent becomes clogged in Redlands households with lint or restricted by blockages, the dryer cannot function as intended, and problems follow. These include extended drying cycles, heat and moisture trapped inside the dryer, internal parts under stress that may lead to repair or failure, and increased fire risks from lint ignition.

Why Fabric Softener is a Risk for Your Dryer and Vent System

Usage of fabric softener results in coating the lint filter and vent system with residue, which traps lint and debris. As the buildup continues, drying cycle performance suffers, temperature levels rise, and the risk of fire hazards grows for Redlands homeowners.

Clear Warning Signs:

• A sticky or coated lint filter that does not clean easily
• Error code alerts are showing up more often on the dryer display
• Clothes are left damp after a cycle finishes
• Strong musty or burnt odors while the dryer is running

Simple Prevention Tips:

• Limit fabric softener use or switch to wool dryer balls for better airflow
• Rinse the lint filter monthly with warm, soapy water to maintain safe operation
• Schedule annual dryer vent service to remove hidden lint, prevent clogged ducts, and avoid costly repair or failure of the unit

What to Try Before Scheduling Dryer Vent Service

Redlands residents can try these quick checks before arranging a visit from Dryer Vent Wizard of Redlands and N San Bernardino:

• Unplug the dryer for several minutes to allow the unit to cool down and reset properly.
• Remove and wash the lint screen along with the surrounding area to improve airflow and keep the drying cycle efficient.
• Look over the dryer vent hose for bends, crushing, or clogged spots that restrict airflow.
• Examine the outdoor vent cover for obstructions such as leaves, nests, or snow that can block the system.
• On certain models, switch off any “Mute” setting so error code alerts appear clearly on dryer displays.
• Run a short cycle to see if the issue has been resolved.
• If the error continues or airflow problems are detected, request service from Dryer Vent Wizard of Redlands and N San Bernardino.

Signs You Need Dryer Vent Maintenance Whether or Not There Is an Error Code

Faults in dryer and vent systems do not always appear in error codes. They often show through performance decline and unusual signs during dryer use:

• Clothes take longer to dry and need extra cycle runs.
• The dryer becomes hot with the moisture and heat trapped inside.
• A burning odor occurs during dryer running due to lint or airflow restriction.
• Lint collects around the door seal, dryer base, wall duct, or exterior vent cover.
• Humidity in the laundry room rises above normal levels.
• Drum temperature goes over 150°F, straining sensors and the unit.
• You may need to unplug the unit frequently before the dryer restarts.

How Often Should Maintenance Be Done and What's the Standard Vent Length

Maintaining a dryer vent involves several factors, including family size, dryer usage, vent length, and the presence of pets:

• Once a year – Typical schedule for most homes.
• Every 3–4 months – Needed for large families, homes with pets, or long vent runs.
• Every 3–5 years – Adequate for single-occupant homes with light dryer use.

Vent length rule: Maximum 25 feet, minus 5 feet for each 90° bend and 2.5 feet for each 45° bend.

Redlands Seasonal Hazards to Consider

Harmless as it may seem, the seasons can affect your dryer and its vent system's performance and safety. Here's how:

• The tendency for moisture buildup is higher during the hot summer season, which makes lint accumulation easier and riskier.
• During winter, rainfall increases moisture, and snow can block the vent system.
• In spring, birds may nest, and other animals may find shelter in the vent system.
• In the fall, leaves and small branches can clog the vent system, restricting airflow.

What to Expect from Dryer Vent Wizard of Redlands and N San Bernardino

As a service provider, we ensure all of our technicians are experienced and equipped with the right tools and materials. We are trusted by Redlands residents for:

• Thorough dryer vent inspection
• Complete dryer and dryer vent cleaning
• Vent reconnection and adjustments
• 90-day service guarantee

When to Call Dryer Vent Wizard of Redlands and N San Bernardino

Call Dryer Vent Wizard of Redlands and N San Bernardino if an error code remains after troubleshooting. A code that continues to display means your dryer or vent is clogged and requires professional service to restore airflow, remove lint, and ensure safe system operation.

Don't Let Your Dryer Compromise Your Safety

Error codes are speaking to you. Instead of seeing them as an inconvenience, treat them as protection.
These alerts are designed to help you take the appropriate course of action not only to ensure a smooth laundry experience but also to keep your family and your home safe.

If your dryer is displaying a code that will not go away, call Dryer Vent Wizard of Redlands and N San Bernardino, and let one of our expert technicians help you.
Book your service today.